Breeding schemes with optimum-contribution selection or truncation selection for beef cattle destined for use on dairy females

We tested the hypothesis that the size of a beef cattle population destined for use on dairy females is smaller under optimum-contribution selection (OCS) than under truncation selection (TRS) at the same genetic gain (ΔG) and the same rate of inbreeding (ΔF). We used stochastic simulation to estimate true ΔG realized at a 0.005 ΔF in breeding schemes with OCS or TRS. The schemes for the beef cattle population also differed in the number of purebred offspring per dam and the total number of purebred offspring per generation. Dams of the next generation were exclusively selected among the one-year-old heifers. All dams were donors for embryo transfer and produced a maximum of 5 or 10 offspring. The total number of purebred offspring per generation was: 400, 800, 1,600 or 4,000 calves, and it was used as a measure of population size. Rate of inbreeding was predicted and controlled using pedigree relationships. Each OCS (TRS) scheme was simulated for 10 discrete generations and replicated 100 (200) times. The OCS scheme and the TRS scheme with a maximum of 10 offspring per dam required approximately 783 and 1,257 purebred offspring per generation to realize a true ΔG of €14 and a ΔF of 0.005 per generation. Schemes with a maximum of 5 offspring per dam required more purebred offspring per generation to realize a similar true ΔG and a similar ΔF. Our results show that OCS and multiple ovulation and embryo transfer act on selection intensity through different mechanisms to achieve fewer selection candidates and fewer selected sires and dams than under TRS at the same ΔG and a fixed ΔF. Therefore, we advocate the use of a breeding scheme with OCS and multiple ovulation and embryo transfer for beef cattle destined for use on dairy females because it is favorable both from an economic perspective and a carbon footprint perspective.     

Establishment of a color tolerance for yarn-dyed fabrics from different color-depth yarns

Yarn-dyed fabric is often woven from warp and weft yarns in the same color depth to ensure a uniform color appearance. The difference in color depth between warp and weft tends to result in the uneven color of the yarn-dyed fabric. This article aims to establish a color tolerance for yarn-dyed fabric that can be woven with a qualified color appearance but from the warp and weft yarns in different color depths. A total of 27 yarn-dyed fabric samples in three color series (red, yellow, and blue) were evaluated by using the yarn-dyed fabric from warp and weft yarns in the same color depth of 2% (on weight of fabric, owf) as the standard. Visual assessment and instrumental measurement of color were carried out to establish the color tolerance ellipse that was defined as CMC (Color Measurement Committee) color differences (2:1) of no more than 1.00. It was found that the color strengths (K/S) and color differences (ΔE_CMC(2:1)) of these fabric samples for each color series had linear relationships with the color depths of warp and weft yarns. The color tolerance ellipses indicated that, even though the warp and weft yarns had an apparent color difference, they could be woven in fabrics with relatively uniform color appearance and meet the requirements for yarn-dyed fabric. This work provided valuable insight into the production of qualified yarn-dyed fabrics from unqualified dyed yarns.     

Understanding the asymmetric perceptions of smartphone security from security feature perspective: A comparative study

Smartphones are being used and relied on by people more than ever before. The open connectivity brings with it great convenience and leads to a variety of risks that cannot be overlooked. Smartphone vendors, security policy designers, and security application providers have put a variety of practical efforts to secure smartphones, and researchers have conducted extensive research on threat sources, security techniques, and user security behaviors. Regrettably, smartphone users do not pay enough attention to mobile security, making many efforts futile. This study identifies this gap between technology affordance and user requirements, and attempts to investigate the asymmetric perceptions toward security features between developers and users, between users and users, as well as between different security features. These asymmetric perceptions include perceptions of quality, perceptions of importance, and perceptions of satisfaction. After scoping the range of smartphone security features, this study conducts an improved Kano-based method and exhaustively analyzes the 245 collected samples using correspondence analysis and importance satisfaction analysis. The 14 security features of the smartphone are divided into four Kano quality types and the perceived quality differences between developers and users are compared. Correspondence analysis is utilized to capture the relationship between the perceived importance of security features across different groups of respondents, and results of importance-satisfaction analysis provide the basis for the developmental path and resource reallocation strategy of security features. This article offers new insights for researchers as well as practitioners of smartphone security.     

基于化学监督的超(超)临界机组关键控制节能指标分析及建议

针对超(超)临界机组参数提高、材质升级,化学技术监督中的监督指标对机组经济性和可靠性影响较大的问题,本文通过机组典型案例分析、技术监督报告、现场实测等,对目前化学监督中影响较大的、关键的技术指标进行了系统性的分析研究。研究结果找出了6项化学监督中超(超)临界机组关键的、影响较大的控制监督指标,且提出了指标控制值和控制方法。这项系统性研究分析方法对指导超(超)临界机组化学监督具有重要的借鉴作用,以控制超(超)临界机组因参数提高和材质升级带来的新问题和新挑战。     

碳酸盐岩裂缝性储层常规测井评价方法

哈萨克斯坦K油田石炭系KT-Ⅱ段储层为开阔台地相中低孔、特低渗灰岩储层，裂缝对改善储层的渗流能力至关重要，前人研究的利用常规测井资料评价碳酸盐岩储层裂缝的方法由于受裂缝产状、饱和度、泥浆侵入深浅等多方面因素的影响，存在确定性差、容易误判的缺陷。基于研究区目的层段有限的取心和电成像测井资料，结合孔隙型储层和裂缝-孔隙型储层测井响应特征，提出了利用补偿中子确定基块岩石电阻率与基块声波时差，再比较二者与深侧向电阻率、声波时差的差异特征，进而综合识别储层不同产状裂缝发育段，最后建立了裂缝孔隙度、次生孔隙度、裂缝渗透率、总渗透率等储层参数的测井解释模型，实现了利用常规测井资料对碳酸盐岩油藏储层的裂缝识别及参数定量评价。该方法应用的测井综合评价成果与取心物性分析、生产动态情况能够更好地匹配，为该类油藏的合理高效开发提供了依据。     

基于LoRa物联网技术的智能照明控制方案在高速公路上的应用——以北京新机场高速公路(南五环-北京新机场)为例

文章结合北京新机场高速公路照明工程实例,阐述了常规照明控制系统的现状,分析了基于新兴的LoRa物联网技术智能照明控制方案的系统原理和系统构成、系统在高速公路智能照明控制领域的应用以及系统应用能达到的节能和管理效益的提升效果,并对系统的扩展应用前景做了研究分析。     

A RBF based finite difference method for option pricing under regime-switching jump-diffusion model

Abstract

In this article, we presented a method for option pricing problem under regime-switching jump-diffusion models. We have proposed a numerical method for solving a partial integro-differential equation (PIDE) for pricing European option and for solving linear complementarity problem (LCP), to evaluate the price of American options. We use implicit explicit method for time semi discretization, followed by radial basis function based finite difference (RBF-FD) method for spatial discretization to solve PIDE. The proposed method is further extended to solve the LCP by coupling it with operator splitting method. Numerical simulation is done for European and American option to demonstrate efficiency and accuracy of the proposed method.     

New version of continuous–discrete cubature Kalman filtering for nonlinear continuous–discrete systems

For nonlinear continuous–discrete systems, this paper elaborates a new accurate implementation of continuous–discrete cubature Kalman filter (CD-CKF). As the main contribution of this work, the new Kalman prediction stage begins by integrating the nonlinear continuous model for all the cubature sample vectors; the prior estimate state and covariance prediction are based on the weighted statistics of these integrated cubature sample vectors and the Gauss–Legendre approximation scheme. The new square root form CD-CKF is also derived and accurately implemented by combining with the modified variable stepsize NIRK. As the advantages of proposed approach, the complicated and error-prone processes of solving covariance differential equation or calculating derivatives are avoided, while the positive semi-definiteness of prior error covariance are numerically guaranteed. Simulations of traffic control scenarios further confirm the new approach’s superior filtering performance in both reliability and accuracy.     

Formulating Pantone colors by unused base inks,formulation software,and a spectrophotometer

Unused base inks that are not going to be used for printing production are considered to be hazardous materials. Their disposal is expensive, and strict environmental regulations should be followed for their disposal. As an alternative, this article describes how spectral data of unused base inks can be gathered and mixed to generate new colors to incorporate them back to print production for small‐volume jobs. In this study, 30 different Pantone colors were selected as target colors. The CIE L*a*b* spectral data of Pantone colors and unused base inks were gathered via a spectrophotometer. A commercial formulation software, based on multiflux theory and CIE L*a*b* color space, was used to formulate ink recipes that contained the base inks. To quantify the performance of ink recipes, they were mixed and printed using an offset printability tester. The CIELAB ΔE*_ab metric, developed by CIE, was used to detect the visual differences between the target Pantone Color and printed colors.